Gpg High Torque CE Certified Gpg Planetary Gearbox Servo Motor Reducer

• Customization: Available
• Application: Motor, Machinery, Agricultural Machinery, Automation Industry
• Function: Change Drive Torque, Speed Reduction
• Model NO.: GPE080-9-S2
• Layout: Coaxial
• Hardness: Hardened Tooth Surface
• Installation: Vertical Type
• Step: Three-Step
• Type: Planetary Gear Box
• Frame Size: 60, 80, 120
• Compatible Motor: Please Send The Motor Model
• IP Level: IP65
• Noise: ≤58dB
• Transport Package: Carton
• Specification: 65mm 90mm 120mm 160mm
• Trademark: GPG
• Origin: China
• HS Code: 8483409090
• Production Capacity: 50000PCS/Month
• Package Size: 18.00cm * 12.00cm * 12.00cm
• Package Gross Weight: 2.500kg

Product Description

Product Description

GPE Series High Precision Planetary Gearbox
1. Low backlash
2. High output torque
3. High efficiency (97%)
4. Low noise
5. High quality (ISO 9001)
6. Multiple mounting positions
7. Simple motor assembly
8. Lifetime lubrication
9. Additional options
10. Roration direction: Same as motor
11. Smooth transmission
 

Product Parameters

 

Planetary Gearbox
GPE	80	9	S2
Reducer Series Code	Size	Gear Ratio	Output Shaft Type
GPBS - -Precision Square Flange Output	60mm 80mm 120mm	1 Stage: 3   4   5   6  7  8  9 10 2 Stage: 12  15  16  20  25  28  30  35  40  45 60  70  80  90  100	S1 - Smooth Output Shaft S2 - Output Shaft With Key

Series	Unit	GPE080							Z^(2)
Lifetime	h	20000
The efficiency with Full Load (3)	%	97							1
	°C	94							2
0perating Temp^(4)		-25~+90
Degree of Protection		IP65
Lubrication		Lifetime Lubrication
Mounting Position		Any
Motor Flange		DIN 42955-N
Standard Backlash	arcmin	≤15							1
		≤18							2
Nominal Input Speed^(8)	rpm	4000
Maximum Input Speed^(8)	rpm	8000
Maximum Radial Load ^(5)(6)(9)	N	1600
Maximum Axial Load ^(5)(6)(9)		1250
Torsional Stiffness	Nm/arcmin	6							1
		6.5							2
Weight	Kg	2.5							1
		3.3							2
Running noise ^(7)	dB(A)	≤60
(1) Ratios(=nin/nout) (2) Number of stages  (3) Depends on the ratio, n2=100rpm (4) Referring to the middle of the body surface (5) These values refer to a speed of the output shaft of n2=100rpm on duty cycle KA=1 and S1-mode for electrical machines and T= 30°C (6) Halfway along the output shaft (7) Sound pressure level; distance 1m; measured on idle running with an input speed of ni =3000rpm; i=5 (8) Allowed operating temperature must be kept; other input speeds on inquiry (9) Depending on the required output torque, radial and axial loads, cycle and required storage life, deviating or partly higher values are posible. We recommend to carry out accurate dimensioning with GPG or to consult Neugart in this respect.

Company Profile